|
NEW MODULE BUILT ONTO 28pin IC PLUG |
|
**CTCSS ENCODE IS NOW AVAILABLE FOR THE AKD 2001 2 metre TRANSCEIVER**
**IMPORTANT NOTE: THIS UPGRADE REQUIRES THAT THE RIG IS ALREADY WORKING ON 12.5kHz STANDARD. >>> How can I tell if a rig is 12.5kHz? Look for a LED next to the squelch control<<<
DETAILS OF THE 12.5kHz UPGRADE:
**SIMPLE PLUG-IN UPGRADE FOR EXISTING 12.5kHz RIGS**
**CTCSS ENCODE ALLOWS REPEATER & GATEWAY OPERATION **
|
NEW MODULE BUILT ONTO 28pin IC PLUG |
|
Simple programming operation from front panel keys.
Any of the available nine tones can be programmed into any channel.
Tones can be edited or deleted as required.
Existing rigs can be upgraded very easily, remove and discard the existing PIC microcontroller and replace it with the ready assembled plug-in piggyback module which incorporates a new PIC and EEPROM which stores the tone data.
Just one solder connection is required to feed the tone to the main board.
Full fitting and operating instructions are supplied.
PRICES
CTCSS UPGRADE MODULE FOR AKD2001 (12.5kHz) £19.95 plus £2.00 P&P
