LARGER PICTURE **NEW PRODUCTION OF THE FORMER AKD 4001 4 metre TRANSCEIVER IS NOW UNDER WAY**
**ASSEMBLED BY GAREX ELECTRONICS WITH OVER 40 YEARS EXPERIENCE IN MOBILE RADIO**
**BUILT TO THE ORIGINAL AKD SPECIFICATION, THE 4001 IS THE ONLY DEDICATED AMATEUR BAND 4 metre TRANSCEIVER**
AVAILABLE DIRECT FROM GAREX ELECTRONICS BY MAIL ORDER
PRICE £149.95 plus £8.00 next day delivery.
AVAILABLE FROM THE FOLLOWING DEALERS:
TETRA COMMUNICATIONS 1 VICTORIA ROAD NORTHAMPTON NN1 5EB Tel: 01604 234333
SYCOM P.O. BOX 148 LEATHERHEAD SURREY KT22 9YW
Tel: 01372 372587 www.sycomcomp.co.uk robin@sycomcomp.co.uk
QSL COMMUNICATIONS Unit 6 WORLE INDUSTRIAL CENTRE COKER ROAD WORLE WESTON-super-MARE BS22 6BX Tel: 01934 512757
WATERS & STANTON 22 MAIN ROAD HOCKLEY ESSEX Tel: 01702 206835
4001 SPECIFICATIONS
|
GENERAL MODULATION: FM FREQUENCY RANGE: 70.2500–70.4875MHz SUPPLY VOLTAGE: 13.2V +/- 10% CHANNEL SPACING: 12.5kHz SPEAKER: 8 Ohm internal OPERATION TEMP RANGE: 0° - 50°C FREQUENCY STABILITY: 10ppm over operating temp range CONNECTIONS ANTENNA: SO239 SUPPLY: In-line fused PTT MIC: Front Panel Socket EXTENSION LS: Front Panel Socket 2.5mm |
RECEIVER SENSITIVITY: <0.25mV for 12dB SINAD ADJACENT CHANNEL SELECTIVITY 56 dB (for 6dB degradation) BLOCKING: 90 dB IMAGE RESPONSE: 70dB AUDIO OUTPUT: 2 WATTS SUPPLY CURRENT (Squelch ON):130 mA TRANSMITTER RF OUTPUT POWER (HIGH): 20-25 WATTS(nominal) RF OUTPUT POWER (LOW): 5 WATTS (nominal) SUPPLY CURRENT (HIGH): 4 AMPS SUPPLY CURRENT (LOW): 1.5 AMPS DEVIATION: +/- 2.5kHz PTT MICROPHONE 600ohm (INCLUDED) |
ACCESSORIES FOR THE 4001
(also suitable for other AKD Transceivers)MOBILE MOUNTING BRACKET KIT £9.95 plus £2.00 P&P
(No extra charge for P&P if ordered with Transceiver)MAINS POWER SUPPLY (not GAREX manufacture) £24.50 plus £8.50 P&P
EXTENSION SPEAKER (lead fitted with 2.5mm jack plug to suit current production 4001) £7.50 plus 2.00 P&P (No extra charge if ordered with Transceiver)
NOTE: NOT ALL AKD TRANSCEIVERS HAVE EXTENSION SPEAKER FACILITY AVAILABLE, and size of jack plug may vary: if in doubt ask GAREX for advice.
TECHNICAL INFORMATION FOR AKD PRODUCTION
USER INSTRUCTION BOOKS ARE AVAILABLE FOR THE FOLLOWING MODELS:
2001 (2 metre) Original Version 25kHz channel spacing
2001 Later Version 12.5kHz channel spacing
4001 (4 metre) All production
DOWNLOAD 4001 HANDBOOK
4001_book.pdf6001 (6 metre) Original production, 20kHz channel spacing, no CTCSS
6001 Later production, 10kHz channel spacing, CTCSS
7003 70cm (available soon)
Price of any of the above: 4 x First Class Stamps (no other form of payment will be accepted, this keeps costs to a minimum,)
CIRCUIT DIAGRAMS
2001 Original version (25kHz)
2001 later version (12.5kHz)
4001 Early versions (Issue No RM4-6ic(x) on pcb)
4001 Later and current version (Issue 1 or 2 marked on pcb)
6001 Early version only
7003 Issue 1 (available soon)
Price of any of the above: 2 x First Class Stamps
IN THE FULLNESS OF TIME THIS INFORMATION WILL BE AVAILABLE TO DOWNLOAD FREE FROM THE GAREX WEBSITE
UPGRADES FOR TRANSCEIVERS
2001: 12.5kHz CHANNEL SPACING, conversion available in two levels: Price of Level 1: £11.75 plus £2.00 P&P
Additional cost of Level 2 components : £7.60
CONVERSION DETAILS:4001: Channel 16 (70.450MHz) DEFAULT FREQUENCY, plug-in replacement PIC: £10.00 inc P&P AVAILABLE NOW
6001: REPEATER SHIFT, 10kHz CHANNEL SPACING & CTCSS: Plug-in replacement PIC ASSEMBLY. Incudes fitting instructions & update pages for Handbook: £22.95 plus £2.00 P&P AVAILABLE NOW
SPARES & SERVICE SUPPORT AVAILABLE FROM GAREX NOW