LARGER PICTURE >>> **NEW PRODUCTION OF THE FORMER AKD 6001 6 metre TRANSCEIVER IS NOW UNDER WAY**
**ASSEMBLED BY GAREX ELECTRONICS WITH OVER 40 YEARS EXPERIENCE IN MOBILE RADIO**
**BUILT TO THE ORIGINAL AKD SPECIFICATION, THE 6001 IS THE ONLY DEDICATED AMATEUR BAND 6 metre TRANSCEIVER**
AVAILABLE DIRECT FROM GAREX ELECTRONICS BY MAIL ORDER
PRICE £169.95 plus £8.75 next day delivery.
AVAILABLE FROM THE FOLLOWING DEALERS:
TETRA COMMUNICATIONS 1 VICTORIA ROAD NORTHAMPTON NN1 5EB Tel: 01604 234333
SYCOM P.O. BOX 148 LEATHERHEAD SURREY KT22 9YW
Tel: 01372 372587 www.sycomcomp.co.uk robin@sycomcomp.co.uk
QSL COMMUNICATIONS Unit 6 WORLE INDUSTRIAL CENTRE COKER ROAD WORLE WESTON-super-MARE BS22 6BX Tel: 01934 512757
WATERS & STANTON 22 MAIN ROAD HOCKLEY ESSEX Tel: 01702 206835
6001 SPECIFICATIONS
|
GENERAL MODULATION: FM FREQUENCY RANGE: 50.500–51.990MHz REPEATER SHIFT (500kHz) SUPPLY VOLTAGE: 13.2V +/- 10% CHANNEL SPACING: 10kHz SPEAKER: 8 Ohm internal OPERATION TEMP RANGE: 0° - 50°C FREQUENCY STABILITY: 10ppm over operating temp range CONNECTIONS ANTENNA: SO239 SUPPLY: In-line fused PTT MIC: Front Panel Socket MICROPHONE 600ohm (INCLUDED) EXTENSION LS: Front Panel Socket 2.5mm |
RECEIVER SENSITIVITY: <0.25mV for 12dB SINAD ADJACENT CHANNEL SELECTIVITY 56 dB (for 6dB degradation) BLOCKING: 90 dB IMAGE RESPONSE: 70dB AUDIO OUTPUT: 2 WATTS SUPPLY CURRENT (Squelch ON):130 mA TRANSMITTER RF OUTPUT POWER (HIGH): 25 WATTS(nominal) RF OUTPUT POWER (LOW): 5 WATTS (nominal CTCSS programmable on repeater channels SUPPLY CURRENT (HIGH): 4 AMPS SUPPLY CURRENT (LOW): 1.5 AMPS DEVIATION: +/- 2.5kHz |
ACCESSORIES FOR THE 6001
(also suitable for other AKD Transceivers)MOBILE MOUNTING BRACKET KIT £9.95 plus £2.00 P&P
(No extra charge for P&P if ordered with Transceiver)MAINS POWER SUPPLY (not GAREX manufacture) £24.50 plus £8.50 P&P
EXTENSION SPEAKER (lead fitted with 2.5mm jack plug to suit current production 4001) £7.50 plus 2.00 P&P (No extra charge if ordered with Transceiver)
NOTE: NOT ALL AKD TRANSCEIVERS HAVE EXTENSION SPEAKER FACILITY AVAILABLE, and size of jack plug may vary: if in doubt ask GAREX for advice.
UPGRADE FOR EARLIER 6001 PRODUCTION:
Plug-in replacement PIC ASSEMBLY provides REPEATER SHIFT, 10kHz CHANNEL SPACING & CTCSS. Incudes fitting instructions (one solder connection involved) & update pages for Handbook: £24.95 inc P&P AVAILABLE NOW