The VHF/UHF section covers 25 – 1000MHz.

It ends in a co-axial tail with a BNC plug (*), and a Ground wire which can help reduce interference.

The HF/SW section covers 100kHz – 30MHz.

It comprises a conventional Long Wire which plugs into the Combiner Unit at the top of the VHF/UHF section. Alternatively, connect it directly into the SO239 socket on the receiver – the VHF/UHF section is free for use on another radio. Enjoy the flexibility!

Easily installed – simply suspend the VHF/UHF section from any convenient point using the string provided, connect the Ground wire to a suitable Earth and plug into the receiver.

To use the HF/SW section, unwind the Long Wire from the bobbin, plug it into the Combiner Unit, OR directly into the receiver, and position the Long Wire for best reception. It can be set up in almost any position: horizontal, vertical, sloping, or a mixture of all three. Run the Long Wire up to the loft, or outdoors.

WEIGHT: 175g OVERALL RANGE: 100kHz – 1000MHz

DIMENSIONS: HF Section: 14m/45’ VHF/UHF Section: 90cm/36"

PRICE: GBP 19.95

• Available to order with alternative connectors: PL259, SMA; (same price).

  NOTE: the co-ax tail length is 0.3m. if this is insufficient for your requirements, we can supply extension leads as follows: BNC line socket to BNC plug.

  Price GBP 2.00 PLUS GBP 0.45 per metre.

  Example: for a 4m extension GBP 2.00 plus 4x0.45 = GBP 3.80

  Please state if an alternative plug is required - PL259 or SMA same price. Please enquire for any other plug.