Wideband receivers which typically cover 100kHz to over 1GHz will need two aerials to cover this range effectively.

The WATSON WAM599 allows you to connect two separate aerials to the single aerial connector on your receiver.

A low frequency aerial (100kHz to 100MHz) is connected to one input on the WAM599 and the VHF/UHF aerial is connected to the other input. This will give optimum performance on all bands with no adjustment needed.

The WAM599 isolates the two aerials so they do not interact, so reducing losses and strong signal overload.

The WAM599 incorporates a DC leakage path which will protect your receiver from static build-up in the aerial.

Frequency range: 100kHz - 100MHz & 100MHz - 1500MHz

Connectors: 2 x BNC Sockets & 1 x BNC plug on 15cm RG-58C/U coaxial cable.

Impedance: 50 Ohms

Size: 45 (W) x 30 (D) x 70 (L) mm

Weight: 150g

The WAM599 is a passive device and requires no power.

The WAM599 is for receivers only. Do not use with a transmitter.